Analysis of Engineering Accreditation Process and Outcomes: Lessons Learned for Successful First Time Application

Tahar Ayadat, Andi Asiz

Abstract


The aims of the paper are to share and analyze engineering accreditation experience starting from the preparation through the outcome, and to discuss lessons learned particularly for first-time applicants. Securing accreditation from a well-recognized international body, such as the Accreditation Board for Engineering and Technology (ABET) can indicate quality of an engineering program. To qualify for an accreditation up to six- to seven-year period, an engineering program must meet a set of accreditation standards or criteria. The article is not limited only for new engineering programs outside the United States who are willing to pursue engineering accreditation from ABET, but it is applicable for an existing accredited program who will undergo next accreditation cycle. The authors presented and analyzed detail accreditation experience for a new established Civil Engineering (CE) Program at Prince Mohammad bin Fahd University (PMU) in Saudi Arabia. Although the ABET website provides detail procedure for the accreditation steps, the detail cases experienced by the PMU CE program will enrich knowledge on how to prepare and handle successful international accreditation. The authors also discussed issues raised during the accreditation activities, including program compliance with the nine ABET criteria, and presented key lessons to prepare for a smooth accreditation process. The main significant result of the accreditation exercise about continuous improvement was summarized in term of the curriculum upgrade, including adding another semester for senior design course and offering new sustainability engineering course, and adding computer aided design course at the early semester.

https://doi.org/10.26803/ijlter.19.9.15


Keywords


Engineering accreditation; quality assurance; student outcomes assessment; continuous improvement

Full Text:

PDF

References


ABET. (2020a). Accreditation. Retrieved from https://www.abet.org/accreditation/

ABET. (2020b). Criteria for Accrediting Engineering Program, 2020-2021. Retrieved from https://www.abet.org/accreditation/accreditation-criteria/criteria-for-accrediting-engineering-programs-2020-2021/

ABET. (2020c). Accreditation Step-by-Step. Retrieved from https://www.abet.org/accreditation/get-accredited/accreditation-step-by-step/

ABET. (2020d). Accreditation Policy and Procedure Manual, 2019-2020. Retrieved from https://www.abet.org/accreditation/accreditation-criteria/accreditation-policy-and-procedure-manual-appm-2019-2020/

Abou-Zeid, A., & Taha, M.A. (2014, April). Accreditation process for engineering programs in Saudi Arabia: challenges and lessons learned. IEEE Global Engineering Education Conference (EDUCON), Istanbul, Turkey. Retrieved from https://doi.org/10.1109/educon.2014.6826250

Albaqami, S. (2019). Accreditation Challenges in Saudi Universities. Frontiers in Education Technology, 2(4). https://doi.org/10.22158/fet.v2n4p273

Al-yahya, S. A., & Abdel-halim, M. A. (2013). A successful experience of ABET accreditation of an electrical engineering program. IEEE Transactions on Education, 56(2), 165-173. https://doi.org/10.1109/te.2012.2206112

Anwar, A. A., & Richards, D. J. (2018). Comparison of EC and ABET Accreditation Criteria. Journal of Professional Issues in Engineering Education and Practice, 144(3), 06018001. Retrieved from https://ascelibrary.org/doi/10.1061/%28ASCE%29EI.1943-5541.0000364

Ayadat, T., Ahmed, D., Chowdhury, S., & Asiz, A. (2020). Measurable performance indicators of student learning outcomes: a case study, Global Journal of Engineering Education, 22(1), 40-50.

Barr, R. E. (2013, March). Preparing for an ABET accreditation. Proceeding of the 2013 ASEE Gulf-Southwest Annual Conference, The University of Texas at Arlington, USA.

Barrett, B., Fernandez, F., & Gonzalez, E. M. (2019). Why universities voluntarily pursue US accreditation: the case of Mexico. Higher Education. https://doi.org/10.1007/s10734-019-00427-y

Calderon, H. E., Vasquez, R., Aponte, D., & Del Valle, M. (2016, Oct.) Successful accreditation of the Electrical Engineering Program offered in two campuses at Caribbean University. IEEE Frontiers in Education Conference (FIE), Erie, PA, USA. https://doi.org/10.1109/fie.2016.7757422

Chowdhury, S., Ayadat, T., & Asiz, A. (2020). Assessment and Grading of Senior Design Course in Engineering Using Rubric – A Case Study. International Journal of Engineering Pedagogy (iJEP).

Darandari, E. Z., Alâ€Qahtani, S. A., Allen, I. D., Alâ€Yafi, W. A., Alâ€Sudairi, A. A., & Catapang, J. (2009). The quality assurance system for postâ€secondary education in Saudi Arabia: A comprehensive, developmental and unified approach. Quality in Higher Education, 15(1), 39-50. https://doi.org/10.1080/13538320902741806

Elnajjar, S., Alomari, S., Omar, F., Selim, M., & Mourad, A. (2019). An Example of ABET Accreditation Practice of Mechanical Engineering Program at UAE University. International Journal for Innovation Education and Research, 7(8), 387-401. https://doi.org/10.31686/ijier.vol7.iss8.1697

Estes, A., & Ressler, S. (2007, June). Surviving ABET accreditation: satisfying the demands of criterion 3, Proceeding of the American Society for Engineering Education Conference and Exposition, Honolulu, USA. https://doi.org/10.18260/1-2--1971

Felder, R. M., & Brent, R. (2003). Designing and teaching courses to satisfy the ABET engineering criteria. Journal of Engineering Education, 92(1), 7-25. https://doi.org/10.1002/j.2168-9830.2003.tb00734.x

Ghaly, S. M. A. (2019, April). Optimization of Quality Assessment and Evaluation Approach for Engineering Program Accreditation. IEEE Global Engineering Education Conference (EDUCON), Dubai, United Arab Emirates. https://doi.org/10.1109/EDUCON.2019.8725162

Hussain, S. M., Issa, G., & El-Khalili, N. (2017), ABET-CAC Accreditation at University of Petra – Assessment plan for continuous improvement, Int'l Conf. Frontiers in Education: CS and CE, ISBN: 1-60132-457-X, CSREA Press.

Kim, H., & Song, O. (2017). The Effect of Engineering Education Accreditation on Materials Engineering Education in University of Seoul. 3rd International Conference on Higher Education Advances (HEAd’17), Valencia, Italy. http://dx.doi.org/10.4995/HEAd17.2017.5190

Marzouk, O. (2019). Status of ABET accreditation in the Arab world. Global Journal of Educational Studies, 5(1), 1-10. https://doi.org/10.5296/gjes.v5i1.14218

Meyer, J., Nel, H., & Rensburg, N. (2016, Nov). Systems Engineering Education in an Accredited Undergraduate Engineering Program. ASME International Mechanical Engineering Congress and Exposition, Phoenix, AZ. https://doi.org/10.1115/IMECE2016-68038

Onsman, A. (2010). Dismantling the perceived barriers to the implementation of national higher education accreditation guidelines in the Kingdom of Saudi Arabia. Journal of Higher Education Policy and Management, 32(5), 511–519. https://doi.org/10.1080/1360080x.2010.511123

PMU Civil Engineering. (2017). Self-Study Report-Civil Engineering Program, submitted to ABET EAC.

Prados, J. W., Peterson, G. D., & Lattuca, L. R. (2005). Quality assurance of engineering education through accreditation: The impact of engineering criteria 2000 and its global influence. Journal of Engineering Education, 165-184. https://doi.org/10.1002/j.2168-9830.2005.tb00836.x

Retnanto, A., Parsaei, H. R., & Parsaei, B. (2018, March). Engineering Accreditation: Assessing and Documenting Students Competencies in their Respected Disciplines. Proceedings of the International Conference on Industrial Engineering and Operations Management, Bandung, Indonesia.

Sriraman, V., & Stapleton, W. (2012). Lesson learned in first time accreditation of engineering programmes. Global Journal of Engineering Educations, 15(2), 103-110.

Urquizo, H. G. (2019, Sept). Professional Profile of Engineering Programs for National Licensing and International Accreditation. International Symposium on Engineering Accreditation and Education (ICACIT), Cusco, Peru. https://doi.org/10.1109/ICACIT46824.2019.9130368

Wear, L., Baiocchi, O. R., Alden, M., Gutmann, R., & Sheng, J. (2012, June). Getting ABET accreditation right the first time. Proceeding of the American Society for Engineering Education Conference and Exposition, San Antonio, TX. https://doi.org/10.18260/1-2--21425

Zahed, A., Bafail, A., Abdulaal, R., & Al-Bahi, A. (2007, June), Preparing for ABET accreditation in a non-western, non-English speaking environment, Proceeding of the American Society for Engineering Education Conference and Exposition, Honolulu, USA. https://doi.org/10.18260/1-2--3421


Refbacks

  • There are currently no refbacks.


e-ISSN: 1694-2116

p-ISSN: 1694-2493